Part Data
- Housing or Shaft Shaft
- Axial or Radial Axial
- Shaft Diameter Ds 0.875 inches
- Ds mm 22.200 mm
- Groove Diameter Dg 0.818 - 0.822 - inches
- Groove Width W 0.086 - 0.091 - inches
- Groove Depth D 0.027 inches
- Free Diameter Df 0.794 - 0.809 - inches
- Thickness T *** 0.075 - 0.081 - inches
- Lug Height H 0.175 - 0.185 - inches
- Maximum Section S Max 0.142 - 0.154 - inches
- Minimum Section S Min 0.077 - 0.089 - inches
- Hole Diameter R 0.078 - 0.078 - inches
- Weight Per 1000 Pcs. 7.500 lbs.
- Edge Margin Y Min. inches
- Clearance Dia. Expanded Over Shaft L1 1.250 inches
- Clearance Dia. Released In Groove L2 1.200 inches
- Gaging Dia. Gd Max inches
- Hardness ST 47.000 - 52.000 - HRC
- Hardness SS 44.000 - 51.000 - HRC
- Hardness BC 34.000 - 43.000 - HRC
- Interchange Waldes Truarc 5160 87
- Interchange IRR 7200 87
- Interchange Anderton N1460 0087
- Interchange Mil Or Aero MS3217C 87
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 10,556 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 3,300 lbs.
- R.P.M. Limits Standard Material RPM 34,000.000
Tool Data
- Standard Pliers (Straight) RPA-2
- 45 Standard Pliers RPA-245
- 90 Standard Pliers RPA-290
- Convertible Pliers RP-340
- 45 Convertible Pliers RP-344
- 90 Convertible Pliers RP-349
- Heavy Duty Pliers (Straight) RPN-A2
- 90 Heavy Duty Pliers RPN-A21
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, External Reinforced The SHR is an extra thick version of a regular SH retaining ring. As such, it is stronger and can withstand greater thrust loads than its standard counterpart.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.