Rings / Axially Assembled Tapered Section Retaining Rings / DHR


Product Image


Part Data

  • Housing or Shaft Housing
  • Axial or Radial Axial
  • Dh mm 22.00 mm
  • Groove Diameter Dg 23.000 - 23.150 mm
  • Groove Width W 1.60 mm
  • Groove Depth D 0.50 mm
  • Free Diameter Df 23.290 - 23.920 mm
  • Thickness T *** 1.44 - 1.50 mm
  • Lug Height H 4.70 mm
  • Hole Diameter R 2.0 mm
  • Large Sect. S 2.80 mm
  • Weight Per 1000 Pcs. 1.900 kg
  • Edge Margin Y Min. 1.50 mm
  • Allowable Radius / Chamfer R/Ch Max, 1.00 mm
  • Hardness ST 47.0 - 54.0 HRC
  • Hardness SG 47 - 54 HRC
  • Interchange Waldes Truarc
  • Interchange IRR
  • Interchange Anderton D1360 0220
  • Interchange Mil Or Aero
  • Interchange Din DIN 472 22x1.50
  • Interchange Seeger-Orbis JS 22

Performance Data

  • Thrust Load Ring Pr 18.00 kN
  • Thrust Load Groove Pg 5.90 kN
  • Max. Load W/ R Max Or Ch Max PR 6.10 kN

Tool Data

  • Heavy Duty Pliers (Straight) RPN-J1
  • 90 Heavy Duty Pliers RPN-J11


  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades
  • Stainless Steel DIN 1.4122
  • Phosphor Bronze


For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel



Axially Assembled, Internal Reinforced, Metric. A thicker version of the DHO featuring a larger radial width than this ring. Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a shoulder) holds

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team


CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.


More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.