Rings / Radially Assembled Retaining Rings / C

Images

Product Image

CAD

Part Data

  • Housing or Shaft Shaft
  • Axial or Radial Radial
  • Shaft Diameter Ds 0.875 inches
  • Ds mm 22.200 mm
  • Groove Diameter Dg 0.786 - 0.792 - inches
  • Groove Width W 0.046 - 0.049 - inches
  • Groove Depth D 0.043 inches
  • Free Diameter Df 0.770 - 0.784 - inches
  • Thickness T *** 0.040 - 0.044 - inches
  • Maximum Section S Max 0.100 - 0.110 - inches
  • Outside Diameter G 0.991 inches
  • Clearance Dia. Installed In Groove L2 1.010 inches
  • Weight Per 1000 Pcs. 2.000 lbs.
  • Edge Margin Y Min. 0.086 inches
  • Hardness ST 47.000 - 52.000 - HRC
  • Hardness SS 44.000 - 51.000 - HRC
  • Hardness BC 34.000 - 43.000 - HRC
  • Interchange Waldes Truarc 5103 87
  • Interchange IRR 2000 87
  • Interchange Anderton N1800 0087
  • Interchange Mil Or Aero MS16632C 87
  • Interchange Din

Performance Data

  • Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 2,202 lbs.
  • Thrust Load Groove Safety Factor Of 2 Pg 1,300 lbs.
  • R.P.M. Limits Standard Material RPM 15,000

Tool Data

  • Standard Applicator (Flat) A-430
  • 45 Applicator A-434
  • 90 Applicator A-439
  • Offset Applicator A-437
  • Heavy Duty Dispenser D-180
  • Spring Rail Dispenser SD-180

Materials

  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades

Finishes

***For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel

Description

Radially Assembled, External Crescent. Ideal for low clearance applications where radial installation is preferred.

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team

Notes

CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.

 

More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.