Part Data
- Housing or Shaft Shaft
- Axial or Radial Axial
- Shaft Diameter Ds 3.750 inches
- Ds mm 95.20 mm
- Groove Diameter Dg 3.4820 - 3.4880 inches
- Groove Width W 0.089 - 0.097 inches
- Groove Depth D 0.1310 inches
- Free Diameter Df 3.438 - 3.488 inches
- Thickness T *** 0.106 - 0.112 inches
- Lug Height H 0.337 - 0.347 inches
- Maximum Section S Max 0.3340 - 0.3500 inches
- Minimum Section S Min 0.1520 - 0.1680 inches
- Hole Diameter R 0.123 - 0.140 inches
- Thickness Beveled End U 0.0795 - 0.0845 inches
- Weight Per 1000 Pcs. 83.000 lbs.
- Edge Margin Y Min. 0.196 inches
- Clearance Dia. Expanded Over Shaft L1 4.52 inches
- Clearance Dia. Released In Groove L2 4.400 inches
- Gaging Dia. Gd Max 4.098 inches
- Hardness ST 44.0 - 51.0 HRC
- Hardness SS 44.0 - 51.0 HRC
- Hardness BC 37.0 - 43.0 HRC
- Interchange Waldes Truarc 5102 375
- Interchange IRR
- Interchange Anderton N1402 0375
- Interchange Mil Or Aero MS16630C 375
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 48822 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 17200 lbs.
- Rigid End Play Take-Up 0.0175 inches
Tool Data
- Ratchet Pliers (w/o Tips) RP-28R
- Straight Ratchet Pliers Tips RP-5009R
- 45 Ratchet Pliers Tips RP-5012R
- 90 Ratchet Pliers Tips RP-5013R
- Alternative Ratchet Pliers (w/o Tips) RP-1000
- Tips For Alt. Ratchet Pliers (Strt/45/90) RP-7801R RP-7845R RP-7890R
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, External Beveled. These rings look exactly like their SH counterpart, only they have a 15 angle on the inner edge. This combines with a complimentary groove angle to eliminate endplay by wedging itself between the groove and the retaine
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.