Part Data
- Housing or Shaft Shaft
- Axial or Radial Axial
- Shaft Diameter Ds 1.023 inches
- Ds mm 26.00 mm
- Groove Diameter Dg 0.9480 - 0.9510 inches
- Groove Width W 0.036 - 0.041 inches
- Groove Depth D 0.0360 inches
- Free Diameter Df 0.936 - 0.951 inches
- Thickness T *** 0.040 - 0.044 inches
- Lug Height H 0.164 - 0.172 inches
- Maximum Section S Max 0.1130 - 0.1230 inches
- Minimum Section S Min 0.0610 - 0.0710 inches
- Hole Diameter R 0.076 - 0.093 inches
- Thickness Beveled End U 0.0320 - 0.0340 inches
- Weight Per 1000 Pcs. 3.900 lbs.
- Edge Margin Y Min. 0.054 inches
- Clearance Dia. Expanded Over Shaft L1 1.43 inches
- Clearance Dia. Released In Groove L2 1.400 inches
- Gaging Dia. Gd Max 1.170 inches
- Hardness ST 47.0 - 53.0 HRC
- Hardness SS 44.0 - 51.0 HRC
- Hardness BC 56.5 - 62.0 HR30N
- Interchange Waldes Truarc 5102 102
- Interchange IRR
- Interchange Anderton N1402 0102
- Interchange Mil Or Aero MS16630C 102
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 5126 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 1300 lbs.
- Rigid End Play Take-Up 0.0050 inches
Tool Data
- Standard Pliers (Straight) RP-400
- 45 Standard Pliers RP-404
- 90 Standard Pliers RP-409
- Convertible Pliers RP-340
- 45 Convertible Pliers RP-344
- 90 Convertible Pliers RP-349
- Heavy Duty Pliers (Straight) RPN-A2
- 90 Heavy Duty Pliers RPN-A21
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, External Beveled. These rings look exactly like their SH counterpart, only they have a 15 angle on the inner edge. This combines with a complimentary groove angle to eliminate endplay by wedging itself between the groove and the retaine
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.