Rings / Self-Locking and Push-On Retaining Rings / TX


Product Image


Part Data

  • Housing or Shaft Shaft
  • Axial or Radial Axial
  • Shaft Diameter Ds 0.995 - 1.005 - inches
  • Ds mm 25.400 mm
  • Thickness T *** 0.013 - 0.017 - inches
  • No. Of Prongs 18
  • Outside Diameter O.D. 1.317 - 1.337 - inches
  • Ring Height H 0.044 - 0.064 - inches
  • Weight Per 1000 Pcs. 2.290 lbs.
  • Min. Distance Face Of Part To End Of Shaft D1 0.108 inches
  • Hardness ST 84.000 - 86.000 - HR15N
  • Hardness SS 82.500 - 86.000 - HR15N
  • Hardness BC 77.000 - 82.000 - HR15N
  • Interchange Waldes Truarc 5115 100
  • Interchange IRR
  • Interchange Anderton N1465 0100
  • Interchange Mil Or Aero
  • Interchange Din

Performance Data

  • Thrust Load 142.000 lbs.


  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades


***For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel


External, Self-Locking Push-On (Curved Rim). This ring features an outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side. The outer rim of the TX is curved which affords greater thrust load capacity and is easier to orient for assembly than the TY ring (next page.)

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team


CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.


More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.