Rings / Self-Locking and Push-On Retaining Rings / SHF


Product Image


Part Data

  • Housing or Shaft Shaft
  • Axial or Radial Axial
  • Shaft Diameter Ds 0.078 - 0.080 inches
  • Ds mm 2.00 mm
  • Groove Diameter Dg inches
  • Groove Width W inches
  • Groove Depth D inches
  • Free Diameter Df 0.071 - 0.076 inches
  • Thickness T *** 0.023 - 0.027 inches
  • Lug Height H 0.068 - 0.074 inches
  • Hole Diameter R 0.030 - 0.038 inches
  • Ring Height B 0.184 inches
  • Weight Per 1000 Pcs. 0.080 lbs.
  • Edge Margin Y Min. inches
  • Clearance Released Over Shaft L2 0.24 inches
  • Hardness ST 83.5 - 86.0 HR15N
  • Interchange Waldes Truarc 5555 7
  • Interchange IRR 7100 7
  • Interchange Anderton N1440 0007
  • Interchange Mil Or Aero MS90707C 7
  • Interchange Din

Performance Data

  • Allowable Thrust Load Pr 8 lbs.
  • Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg
  • R.P.M. Limits Standard Material RPM

Tool Data

  • Heavy Duty Pliers (Straight) RPN-G0


  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades


For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel


External, Self-Locking Friction. The SHF ring resembles a regular SH ring except that it its designed to function on a shaft without a groove. The design of the ring causes it to exert significant gripping power uniformly on the shaft (except where the ga

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team


CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.


More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.