Rings / Radially Assembled Retaining Rings / LC

Images

Product Image

CAD

Part Data

  • Housing or Shaft Shaft
  • Axial or Radial Radial
  • Shaft Diameter Ds 2.250 inches
  • Ds mm 57.100 mm
  • Groove Diameter Dg 2.073 - 2.083 - inches
  • Groove Width W 0.086 - 0.091 - inches
  • Groove Depth D 0.086 inches
  • Free Diameter Df 2.051 - 2.063 - inches
  • Thickness T *** 0.075 - 0.081 - inches
  • Maximum Section E 0.255 - 0.269 - inches
  • Clearance Dia. Installed In Groove L2 2.650 inches
  • Weight Per 1000 Pcs. 37.300 lbs.
  • Edge Margin Y Min. 0.258 inches
  • Hardness ST 47.000 - 52.000 - HRC
  • Hardness SS 44.000 - 51.000 - HRC
  • Hardness BC 37.000 - 43.000 - HRC
  • Interchange Waldes Truarc 5107 225
  • Interchange IRR
  • Interchange Anderton
  • Interchange Mil Or Aero AS90708D 225
  • Interchange Din

Performance Data

  • Thrust Load Ring Safety Factor Of 3 Pr 21,112 lbs.
  • Thrust Load Groove Safety Factor Of 2 Pg 10,300 lbs.
  • R.P.M. Limits Standard Material RPM 13,500.000

Materials

  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades

Finishes

***For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel

Documentation

Description

Radially Assembled, External Interlocking. The LC ring is produced in two identical halves. The ends interlock into a groove on a shaft and, once assembled, are dynamically balanced. As a result, they are particularly effective at retaining assemblies with extremely high rotational speeds.

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team

Notes

CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.

 

More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.