Rings / Self-Locking and Push-On Retaining Rings / DTI

Images

Product Image

CAD

Part Data

  • Housing or Shaft Housing
  • Axial or Radial Axial
  • Dh mm 35.000 - 35.200 - mm
  • Groove Diameter Dg 35.200 - 35.330 - mm
  • Groove Width W 1.000 mm
  • Thickness T *** 0.500 mm
  • No. Of Prongs 12.000
  • Outside Diameter O.D. 35.400 mm
  • Inside Diameter I.D. 25.000 mm
  • Weight Per 1000 Pcs. 1.300 kg
  • Edge Margin Y Min. mm
  • Min. Distance Face Of Part To End Of Housing D1 4.000 mm
  • Hardness ST 83.000 - 85.500 - HR15N
  • Hardness SS 82.500 - 86.000 - HR15N
  • Hardness SG 84.000 - 87.500 - HR15N
  • Interchange Waldes Truarc
  • Interchange IRR
  • Interchange Anderton M1305 0350
  • Interchange Mil Or Aero
  • Interchange Din
  • Interchange Seeger-Orbis ZJ 35

Performance Data

  • Thrust Load 900 N

Materials

  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades
  • Stainless Steel DIN 1.4122
  • Phosphor Bronze

Finishes

***For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel

Documentation

Description

Self-Locking, Internal Push-On, Metric. The internal version of the TX with a curved inner rim and a series of prongs protruding outward. The ends create interference with the housing when the ring is installed and a load introduced to the other side.

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team

Notes

CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.

 

More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.