Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 1.750 inches
- Dh mm 44.40 mm
- Groove Diameter Dg 1.8530 - 1.8630 inches
- Groove Width W 0.100 - 0.105 inches
- Groove Depth D 0.0540 inches
- Free Diameter Df 1.917 - 1.977 inches
- Thickness T *** 0.059 - 0.065 inches
- Lug Height H 0.229 - 0.239 inches
- Maximum Section S Max 0.1640 - 0.1780 inches
- Minimum Section S Min 0.0760 - 0.0900 inches
- Hole Diameter R 0.076 - 0.093 inches
- Bow Height Bh 0.076 - 0.130 inches
- Weight Per 1000 Pcs. 10.300 lbs.
- Edge Margin Y Min. inches
- Clearance Dia. Compressed In Housing L1 1.26 inches
- Clearance Dia. Released In Groove L2 1.360 inches
- Gap Width Ring In Groove G inches
- Outer Groove Wall To Face Of Retained Part J Max 0.075 inches
- Outer Groove Wall To Face Of Retained Part J Min 0.095 inches
- Hardness ST 47.0 - 52.0 HRC
- Hardness SS 44.0 - 51.0 HRC
- Hardness BC 34.0 - 43.0 HRC
- Interchange Waldes Truarc N5001 175
- Interchange IRR 3001 X175
- Interchange Anderton N1301 1750
- Interchange Mil Or Aero MS16629E 175
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 15580 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 8050 lbs.
- Resilient Take-Up Of Tolerances A & B 0.020 inches
- Force Needed To Flatten Rings 35 lbs.
Tool Data
- Standard Pliers (Straight) RP-300
- 45 Standard Pliers RP-304
- 90 Standard Pliers RP-309
- Convertible Pliers RP-340
- 45 Convertible Pliers RP-344
- 90 Convertible Pliers RP-349
- Heavy Duty Pliers (Straight) RPN-J2
- 90 Heavy Duty Pliers RPN-J21
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, Internal Bowed. Compensating for accumulated tolerances is what a BHO retaining ring is designed to do in a housing/bore. Once snapped into the groove, bowed rings exert a force or preload on the retained parts for the range specified.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.