Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 1.625 inches
- Dh mm 41.300 mm
- Groove Diameter Dg 1.743 - 1.748 - inches
- Groove Width W 0.051 - 0.056 - inches
- Groove Depth D 0.059 inches
- Free Diameter Df 1.779 - 1.844 - inches
- Thickness T *** 0.059 - 0.065 - inches
- Lug Height H 0.225 - 0.235 - inches
- Maximum Section S Max 0.157 - 0.171 - inches
- Minimum Section S Min 0.075 - 0.089 - inches
- Hole Diameter R 0.076 - 0.093 - inches
- Thickness Beveled End U 0.046 - 0.048 - inches
- Weight Per 1000 Pcs. 10.000 lbs.
- Edge Margin Y Min. 0.088 inches
- Clearance Dia. Compressed In Housing L1 1.160 inches
- Clearance Dia. Released In Groove L2 1.220 inches
- Gap Width Ring In Groove G 0.242 inches
- Hardness ST 47.000 - 52.000 - HRC
- Hardness SS 44.000 - 51.000 - HRC
- Hardness BC 34.000 - 43.000 - HRC
- Interchange Waldes Truarc N5002 162
- Interchange IRR
- Interchange Anderton N1302 0162
- Interchange Mil Or Aero MS16631F 162
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 14,413 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 14,413 lbs.
- Rigid End Play Take-Up 0.008 inches
Tool Data
- Standard Pliers (Straight) RP-300
- 45 Standard Pliers RP-304
- 90 Standard Pliers RP-309
- Convertible Pliers RP-340
- 45 Convertible Pliers RP-344
- 90 Convertible Pliers RP-349
- Heavy Duty Pliers (Straight) RPN-J2
- 90 Heavy Duty Pliers RPN-J21
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, Internal Beveled. These rings look exactly like their HO counterpart, only they have a 15° angle on the outer edge. This combines with a complementary groove angle to eliminate endplay by wedging itself between the groove and the retained part.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.