Rings / Self-Locking and Push-On Retaining Rings / TY

Images

Product Image

CAD

Part Data

  • Housing or Shaft Shaft
  • Axial or Radial Axial
  • Shaft Diameter Ds 0.093 - 0.095 - inches
  • Ds mm 2.390 mm
  • Thickness T *** 0.009 - 0.011 - inches
  • No. Of Prongs 3.000
  • Outside Diameter O.D. 0.245 - 0.255 - inches
  • Weight Per 1000 Pcs. 0.090 lbs.
  • Min. Distance Face Of Part To End Of Shaft D1 0.040 inches
  • Hardness ST 84.000 - 86.000 - HR15N
  • Hardness SS 82.500 - 86.000 - HR15N
  • Hardness BC 77.000 - 82.000 - HR15N
  • Interchange Waldes Truarc 5105 9
  • Interchange IRR 6100 9
  • Interchange Anderton N1405 0009
  • Interchange Mil Or Aero
  • Interchange Din

Performance Data

  • Thrust Load 13 lbs.

Materials

  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades

Finishes

***For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel

Documentation

Description

External, Self-Locking Push-On (Flat Rim). This ring features an outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side. The outer rim of the TY is flat.

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team

Notes

CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.

 

More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.