Rings / Self-Locking and Push-On Retaining Rings / TI

Images

Product Image

CAD

Part Data

  • Housing or Shaft Housing
  • Axial or Radial Axial
  • Housing Dia. Dh 1.748 - 1.752 - inches
  • Dh mm 44.450 mm
  • Thickness T *** 0.013 - 0.017 - inches
  • No. Of Prongs 12
  • Inside Diameter I.D. 1.428 - 1.448 - inches
  • Weight Per 1000 Pcs. 2.100 lbs.
  • Min. Distance Face Of Part To End Of Housing D1 0.060 inches
  • Hardness ST 84.000 - 86.000 - HR15N
  • Hardness SS 82.500 - 86.000 - HR15N
  • Hardness BC 77.000 - 82.000 - HR15N
  • Interchange Waldes Truarc 5005 175
  • Interchange IRR R6000 175
  • Interchange Anderton N1305 0175
  • Interchange Mil Or Aero
  • Interchange Din

Performance Data

  • Thrust Load 55.000 lbs.

Materials

  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades

Finishes

***For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel

Documentation

Description

Internal, Self-Locking Push-On The internal version of the TY featuring a series of prongs protruding outward. The ends create interference with the housing when the ring is installed and a load introduced to the other side.

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team

Notes

CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.

 

More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.