Part Data
- Housing or Shaft Shaft
- Axial or Radial Axial
- Shaft Diameter Ds 1.969 inches
- Ds mm 50.00 mm
- Groove Diameter Dg 1.8520 - 1.8620 inches
- Groove Width W 0.068 - 0.072 inches
- Groove Depth D 0.0560 inches
- Free Diameter Df 1.799 - 1.832 inches
- Thickness T *** 0.059 - 0.065 inches
- Lug Height H 0.206 - 0.218 inches
- Maximum Section S Max 0.1000 - 0.1120 inches
- Minimum Section S Min 0.1000 - 0.1120 inches
- Hole Diameter R 0.076 - 0.093 inches
- Weight Per 1000 Pcs. 20.500 lbs.
- Edge Margin Y Min. inches
- Clearance Dia. Expanded Over Shaft L1 2.43 inches
- Clearance Dia. Released In Groove L2 2.320 inches
- Gaging Dia. Gd Max inches
- Hardness ST 47.0 - 52.0 HRC
- Hardness SS 44.0 - 51.0 HRC
- Hardness BC 37.0 - 43.0 HRC
- Interchange Waldes Truarc 5108 196
- Interchange IRR 4100 196
- Interchange Anderton N1408 0196
- Interchange Mil Or Aero MS16626C 196
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 9693 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 3900 lbs.
- R.P.M. Limits Standard Material RPM 10500
Tool Data
- Standard Pliers (Straight) RP-400
- 45 Standard Pliers RP-404
- 90 Standard Pliers RP-409
- Convertible Pliers RP-340
- 45 Convertible Pliers RP-344
- 90 Convertible Pliers RP-349
- Heavy Duty Pliers (Straight) RPN-A2
- 90 Heavy Duty Pliers RPN-A21
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, External Inverted Functions like an SH ring on a shaft, only the lugs are reversed. This version reduces the distance the lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.