Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 0.688 inches
- Dh mm 17.50 mm
- Groove Diameter Dg 0.7300 - 0.7340 inches
- Groove Width W 0.039 - 0.042 inches
- Groove Depth D 0.0220 inches
- Free Diameter Df 0.758 - 0.773 inches
- Thickness T *** 0.033 - 0.037 inches
- Lug Height H 0.127 - 0.137 inches
- Maximum Section S Max 0.0590 - 0.0670 inches
- Minimum Section S Min 0.0320 - 0.0400 inches
- Hole Diameter R 0.060 - 0.072 inches
- Weight Per 1000 Pcs. 1.200 lbs.
- Edge Margin Y Min. inches
- Clearance Dia. Compressed In Housing L1 0.40 inches
- Clearance Dia. Released In Groove L2 0.440 inches
- Gap Width Ring In Groove G 0.118 inches
- Hardness ST 67.5 - 72.0 HR30N
- Hardness SS 63.0 - 69.5 HR30N
- Hardness BC 54.0 - 62.0 HR30N
- Interchange Waldes Truarc N5000 68
- Interchange IRR 3000 X68
- Interchange Anderton N1300 0068
- Interchange Mil Or Aero MS16625E 68
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 2741 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 1280 lbs.
Tool Data
- Standard Pliers (Straight) RPL-100
- 45 Standard Pliers RPL-104
- 90 Standard Pliers RPL-109
- Convertible Pliers RP-320
- 45 Convertible Pliers RP-324
- 90 Convertible Pliers RP-329
- Heavy Duty Pliers (Straight) RPN-J1
- 90 Heavy Duty Pliers RPN-J11
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, Internal. Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a shoulder) holds an assembly in place.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.