Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 0.777 inches
- Dh mm 19.700 mm
- Groove Diameter Dg 0.822 - 0.828 - inches
- Groove Width W 0.062 - 0.065 - inches
- Groove Depth D 0.024 inches
- Free Diameter Df 0.849 - 0.869 - inches
- Thickness T *** 0.040 - 0.044 - inches
- Lug Height H 0.141 - 0.151 - inches
- Maximum Section S Max 0.069 - 0.079 - inches
- Minimum Section S Min 0.039 - 0.049 - inches
- Hole Diameter R 0.060 - 0.072 - inches
- Bow Height Bh 0.060 - 0.081 - inches
- Weight Per 1000 Pcs. 1.700 lbs.
- Edge Margin Y Min. inches
- Clearance Dia. Compressed In Housing L1 0.475 inches
- Clearance Dia. Released In Groove L2 0.520 inches
- Gap Width Ring In Groove G inches
- Outer Groove Wall To Face Of Retained Part J Max 0.049 inches
- Outer Groove Wall To Face Of Retained Part J Min 0.060 inches
- Hardness ST 67.500 - 72.000 - HR30N
- Hardness SS 63.000 - 69.500 - HR30N
- Hardness BC 54.000 - 62.000 - HR30N
- Interchange Waldes Truarc N5001 77
- Interchange IRR 3001 X77
- Interchange Anderton N1301 0770
- Interchange Mil Or Aero MS16629E 77
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 4,618 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 1,580 lbs.
- Resilient Take-Up Of Tolerances A & B 0.011 inches
- Force Needed To Flatten Rings 80.000 lbs.
Tool Data
- Standard Pliers (Straight) RPL-100
- 45 Standard Pliers RPL-104
- 90 Standard Pliers RPL-109
- Convertible Pliers RP-320
- 45 Convertible Pliers RP-324
- 90 Convertible Pliers RP-329
- Heavy Duty Pliers (Straight) RPN-J1
- 90 Heavy Duty Pliers RPN-J11
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, Internal Bowed. Compensating for accumulated tolerances is what a BHO retaining ring is designed to do in a housing/bore. Once snapped into the groove, bowed rings exert a force or preload on the retained parts for the range specified.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.