BHO-150
Looking for a specific material or finish? View complete part numbers and request a quote below.
Specifications
Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 1.500 inches
- Dh mm 38.100 mm
- Groove Diameter Dg 1.590 - 1.598 - inches
- Groove Width W 0.070 - 0.073 - inches
- Groove Depth D 0.047 inches
- Free Diameter Df 1.635 - 1.685 - inches
- Thickness T *** 0.048 - 0.052 - inches
- Lug Height H 0.175 - 0.185 - inches
- Maximum Section S Max 0.127 - 0.139 - inches
- Minimum Section S Min 0.060 - 0.072 - inches
- Hole Diameter R 0.076 - 0.093 - inches
- Bow Height Bh 0.076 - 0.097 - inches
- Weight Per 1000 Pcs. 6.500 lbs.
- Edge Margin Y Min. inches
- Clearance Dia. Compressed In Housing L1 1.120 inches
- Clearance Dia. Released In Groove L2 1.210 inches
- Gap Width Ring In Groove G inches
- Outer Groove Wall To Face Of Retained Part J Max 0.057 inches
- Outer Groove Wall To Face Of Retained Part J Min 0.068 inches
- Hardness ST 47.000 - 52.000 - HRC
- Hardness SS 44.000 - 51.000 - HRC
- Hardness BC 34.000 - 43.000 - HRC
- Interchange Waldes Truarc N5001 150
- Interchange IRR 3001 X150
- Interchange Anderton N1301 1500
- Interchange Mil Or Aero MS16629E 150
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 10,708 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 6,000 lbs.
- Resilient Take-Up Of Tolerances A & B 0.011 inches
- Force Needed To Flatten Rings 35.000 lbs.
Tool Data
- Standard Pliers (Straight) RP-300
- 45 Standard Pliers RP-304
- 90 Standard Pliers RP-309
- Convertible Pliers RP-340
- 45 Convertible Pliers RP-344
- 90 Convertible Pliers RP-349
- Heavy Duty Pliers (Straight) RPN-J2
- 90 Heavy Duty Pliers RPN-J21
Product SKUs
Product SKUs listed may not include all available options. If you don't see what you're looking for, or need help selecting the right part, please contact us.
Materials and Finishes
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
- ZD - Zinc Dichromate, Carbon Steel
Documentation
Description
BHO retaining rings are axially assembled internal circlips with a bowed profile and are part of Rotor Clip’s tapered section retaining ring family. Installed into a groove in a housing/bore, the bowed design applies a preload to compensate for accumulated tolerances and maintain internal axial retention over the specified range.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.