Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 0.562 inches
- Dh mm 14.300 mm
- Groove Diameter Dg 0.594 - 0.598 - inches
- Groove Width W 0.039 - 0.042 - inches
- Groove Depth D 0.017 inches
- Free Diameter Df 0.615 - 0.630 - inches
- Thickness T *** 0.033 - 0.037 - inches
- Lug Height H 0.127 - 0.137 - inches
- Maximum Section S Max 0.049 - 0.057 - inches
- Minimum Section S Min 0.031 - 0.039 - inches
- Hole Diameter R 0.045 - 0.057 - inches
- Weight Per 1000 Pcs. 0.860 lbs.
- Edge Margin Y Min. inches
- Clearance Dia. Compressed In Housing L1 0.275 inches
- Clearance Dia. Released In Groove L2 0.305 inches
- Gap Width Ring In Groove G 0.095 inches
- Hardness ST 67.500 - 72.000 - HR30N
- Hardness SS 63.000 - 69.500 - HR30N
- Hardness BC 54.000 - 62.000 - HR30N
- Interchange Waldes Truarc N5000 56
- Interchange IRR 3000 X56
- Interchange Anderton N1300 0056
- Interchange Mil Or Aero MS16625E 56
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 2,253 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 710 lbs.
Tool Data
- Standard Pliers (Straight) RP-100
- 45 Standard Pliers RP-104
- 90 Standard Pliers RP-109
- Convertible Pliers RP-320
- 45 Convertible Pliers RP-324
- 90 Convertible Pliers RP-329
- Heavy Duty Pliers (Straight) RPN-J0
- 90 Heavy Duty Pliers RPN-J01
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, Internal. Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a shoulder) holds an assembly in place.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.