Retaining Rings: Circlips, Snap Rings, Spiral Rings & Wave Springs for the Oil & Gas Industry
Built to perform in demanding operating environments.
Engineered for the Extremes of Exploration, Drilling, and Extraction
Rotor Clip retaining rings (circlips, snap rings, spiral rings), wave springs, and hose clamps are used in oil and gas systems across exploration and production, including downhole tools, subsea systems, and drive shaft assemblies. Our parts are specified for applications with high load requirements, elevated temperatures, and corrosive operating environments, including HPHT and sour service conditions. Materials and designs comply with NACE MR0175 requirements.
With decades of industry experience, our engineers work directly with your team to support part selection, material selection, and application requirements.
The Parts You Need for Oil & Gas Applications
Part selection for oil and gas applications depends on load requirements, available space, and installation constraints.
The configurations below are used in critical oil and gas assembly designs.
High-Performance Materials for Harsh Environments
Rotor Clip maintains one of the largest inventories of standard and specialty alloys in the industry, with over 100,000 sq. ft. of dedicated storage. These materials support high mechanical loads, corrosive environments, and elevated temperatures in excess of 1,000°F, covering a wide range of oil and gas application requirements and production timelines.
| Standard & Specialty Materials | DIN Material Code |
|---|---|
| A286 Stainless Steel | 1.4980 |
| AISI 302 Stainless Steel | 1.4319 |
| AISI 316 Stainless Steel | 1.4401 |
| Beryllium-Copper | 2.1247 |
| Phosphor-Bronze | 2.1030 |
| Inconel X-750 | 2.4669 |
| Elgiloy | 2.4711 |
| Hastelloy C276 | 2.4819 |
All materials are suitable for HPHT and sour service environments and comply with NACE MR0175 requirements.
Engineering and Development Support
Rotor Clip works directly with engineering teams from prototype through production, supporting part selection, customization, and application requirements across oil and gas systems. With regional engineering and customer support teams located globally, we’re there when you need us, wherever you need us.
Quality Assurance and Traceability
Every Rotor Clip retaining ring, wave spring, and hose clamp is supplied with full traceability, linked to material source, heat treatment records, and inspection data. Products are designed to meet global oil and gas industry standards and are supported with complete documentation from production through final release. Our in-house laboratory evaluates mechanical and metallurgical properties across production lots. Certifications include ISO 9001, ISO 14001, AS9100, IATF 16949, and ISO 13485.
Testing & Inspection Capabilities:
• Chemical composition verification of incoming steel
• Dimensional inspection to specification requirements
• Heat treat response and hardness testing
• Corrosion resistance evaluation through salt spray testing
• Lot-level inspection using defined control plans
• Load and fatigue testing – destructive and non-destructive methods
Oil and Gas Applications for Retaining Rings and Wave Springs
Explore examples of Rotor Clip circlips, snap rings, and wave springs used in oil and gas applications.
Coaxial Valve with Multi-Turn Wave Spring
Downhole Drilling Tool with Multi-Turn Wave Spring
Rotary Union with Spiral Retaining Ring
Ball Valve with Multi-Turn Wave Spring
Pump with Single-Turn Wave Spring
Oil & Gas Industry FAQs
Explore frequently asked questions from our customers in oil and gas on our retaining rings, wave springs, and hose clamps.
Yes. We specialize in custom solutions for oil and gas applications where standard parts are insufficient. Our engineers work directly with your team to develop parts to your exact specifications — including large diameters, heavy-duty cross-sections, specialized materials, and tight tolerances. Custom retaining rings and wave springs are fully supported from design through production.
See more on ring customizationSee more on spring customization
Selection is based on installation method, groove design, and required load conditions. Axial and radial installation constraints also influence whether a tapered section ring (circlip), constant section ring (snap ring), or spiral ring is most suitable.
Performance is driven by groove integrity, material selection, and how load is distributed across the ring. Full circumferential contact designs can help distribute load more evenly within the groove.
Validation often includes dimensional checks, load testing, and evaluation under representative environmental conditions such as temperature cycling or corrosive exposure, depending on application requirements.
We offer a range of standard and specialty alloys for oil and gas environments, including A286, 302 and 316 stainless steels, Beryllium Copper, Phosphor Bronze, Inconel X-750, Elgiloy, and Hastelloy C276. These materials are used in applications involving high mechanical loads, elevated temperatures, corrosive media, and HPHT or sour service conditions compliant with NACE MR0175.
Mehr als nur Teile. Eine echte Partnerschaft.
Unsere Leidenschaft gilt der Herstellung der besten Ringe, Federn und Klemmen. Unsere Mission besteht darin, Ihre Arbeit zum Erfolg zu führen. Wir sind für Sie da.