Part Data
- Housing or Shaft Shaft
- Axial or Radial Axial
- Shaft Diameter Ds 7.000 inches
- Ds mm 177.800 mm
- Groove Diameter Dg 6.582 - 6.590 - inches
- Groove Width W 0.129 - 0.137 - inches
- Groove Depth D 0.205 inches
- Free Diameter Df 6.520 - 6.620 - inches
- Thickness T *** 0.151 - 0.161 - inches
- Lug Height H 0.503 - 0.527 - inches
- Maximum Section S Max 0.500 - 0.530 - inches
- Minimum Section S Min 0.241 - 0.271 - inches
- Hole Diameter R 0.185 - 0.207 - inches
- Thickness Beveled End U 0.118 - 0.124 - inches
- Weight Per 1000 Pcs. 388.000 lbs.
- Edge Margin Y Min. 0.307 inches
- Clearance Dia. Expanded Over Shaft L1 8.132 inches
- Clearance Dia. Released In Groove L2 7.932 inches
- Gaging Dia. Gd Max 7.520 inches
- Hardness ST 44.000 - 51.000 - HRC
- Hardness SS 44.000 - 51.000 - HRC
- Hardness BC 37.000 - 43.000 - HRC
- Interchange Waldes Truarc 5102 700
- Interchange IRR
- Interchange Anderton N1402 0700
- Interchange Mil Or Aero MS16630C 700
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 130,529 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 50,500 lbs.
- Rigid End Play Take-Up 0.027 inches
Tool Data
- Ratchet Pliers (w/o Tips) RP-1200
- Straight Ratchet Pliers Tips RP-68001R
- 45 Ratchet Pliers Tips RP-68451R
- 90 Ratchet Pliers Tips RP-68901R
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, External Beveled. These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complimentary groove angle to eliminate endplay by wedging itself between the groove and the retained part
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.