Part Data
- Housing or Shaft Shaft
- Axial or Radial Axial
- Shaft Diameter Ds 6.000 inches
- Ds mm 152.400 mm
- Groove Diameter Dg 5.644 - 5.651 - inches
- Groove Width W 0.102 - 0.110 - inches
- Groove Depth D 0.174 inches
- Free Diameter Df 5.591 - 5.671 - inches
- Thickness T *** 0.121 - 0.129 - inches
- Lug Height H 0.532 - 0.548 - inches
- Maximum Section S Max 0.425 - 0.445 - inches
- Minimum Section S Min 0.161 - 0.181 - inches
- Hole Diameter R 0.154 - 0.176 - inches
- Thickness Beveled End U 0.092 - 0.098 - inches
- Weight Per 1000 Pcs. 210.000 lbs.
- Edge Margin Y Min. 0.261 inches
- Clearance Dia. Expanded Over Shaft L1 6.950 inches
- Clearance Dia. Released In Groove L2 6.780 inches
- Gaging Dia. Gd Max 6.380 inches
- Hardness ST 44.000 - 51.000 - HRC
- Hardness SS 44.000 - 51.000 - HRC
- Hardness BC 37.000 - 43.000 - HRC
- Interchange Waldes Truarc 5102 600
- Interchange IRR
- Interchange Anderton N1402 0600
- Interchange Mil Or Aero MS16630C 600
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 89,625 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 37,000 lbs.
- Rigid End Play Take-Up 0.023 inches
Tool Data
- Ratchet Pliers (w/o Tips) RP-1000
- Straight Ratchet Pliers Tips RP-7801R
- 45 Ratchet Pliers Tips RP-7845R
- 90 Ratchet Pliers Tips RP-7890R
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, External Beveled. These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complimentary groove angle to eliminate endplay by wedging itself between the groove and the retained part
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.