Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 7.500 inches
- Dh mm 190.50 mm
- Groove Diameter Dg 7.9740 - 7.9820 inches
- Groove Width W 0.159 - 0.169 inches
- Groove Depth D 0.2370 inches
- Free Diameter Df 8.180 - 8.360 inches
- Thickness T *** 0.182 - 0.192 inches
- Lug Height H 0.535 - 0.555 inches
- Maximum Section S Max 0.5350 - 0.5550 inches
- Minimum Section S Min 0.2370 - 0.2570 inches
- Hole Diameter R 0.185 - 0.207 inches
- Thickness Beveled End U 0.1470 - 0.1530 inches
- Weight Per 1000 Pcs. 485.000 lbs.
- Edge Margin Y Min. 0.355 inches
- Clearance Dia. Compressed In Housing L1 6.36 inches
- Clearance Dia. Released In Groove L2 6.590 inches
- Gap Width Ring In Groove G 1.138 inches
- Hardness ST 40.0 - 47.0 HRC
- Hardness SS 44.0 - 51.0 HRC
- Hardness BC 34.0 - 43.0 HRC
- Interchange Waldes Truarc N5002 750
- Interchange IRR
- Interchange Anderton N1302 0750
- Interchange Mil Or Aero MS16631F 750
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 201173 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 201173 lbs.
- Rigid End Play Take-Up 0.0320 inches
Tool Data
- Ratchet Pliers (w/o Tips) RP-1100
- Straight Ratchet Pliers Tips RP-71001R
- 45 Ratchet Pliers Tips RP-71451R
- 90 Ratchet Pliers Tips RP-71901R
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, Internal Beveled. These rings look exactly like their HO counterpart, only they have a 15 angle on the outer edge. This combines with a complementary groove angle to eliminate endplay by wedging itself between the groove and the retaine
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.