Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 6.750 inches
- Dh mm 171.400 mm
- Groove Diameter Dg 7.174 - 7.182 - inches
- Groove Width W 0.128 - 0.138 - inches
- Groove Depth D 0.212 inches
- Free Diameter Df 7.365 - 7.525 - inches
- Thickness T *** 0.151 - 0.161 - inches
- Lug Height H 0.505 - 0.525 - inches
- Maximum Section S Max 0.506 - 0.524 - inches
- Minimum Section S Min 0.215 - 0.233 - inches
- Hole Diameter R 0.185 - 0.207 - inches
- Thickness Beveled End U 0.117 - 0.123 - inches
- Weight Per 1000 Pcs. 325.000 lbs.
- Edge Margin Y Min. 0.318 inches
- Clearance Dia. Compressed In Housing L1 5.680 inches
- Clearance Dia. Released In Groove L2 5.880 inches
- Gap Width Ring In Groove G 0.985 inches
- Hardness ST 44.000 - 51.000 - HRC
- Hardness SS 44.000 - 51.000 - HRC
- Hardness BC 34.000 - 43.000 - HRC
- Interchange Waldes Truarc N5002 675
- Interchange IRR
- Interchange Anderton N1302 0675
- Interchange Mil Or Aero MS16631F 675
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 151,032 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 151,032 lbs.
- Rigid End Play Take-Up 0.028 inches
Tool Data
- Ratchet Pliers (w/o Tips) RP-1100
- Straight Ratchet Pliers Tips RP-71001R
- 45 Ratchet Pliers Tips RP-71451R
- 90 Ratchet Pliers Tips RP-71901R
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, Internal Beveled. These rings look exactly like their HO counterpart, only they have a 15° angle on the outer edge. This combines with a complementary groove angle to eliminate endplay by wedging itself between the groove and the retained part.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.