Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 1.000 inches
- Dh mm 25.400 mm
- Groove Diameter Dg 1.076 - 1.079 - inches
- Groove Width W 0.036 - 0.041 - inches
- Groove Depth D 0.038 inches
- Free Diameter Df 1.101 - 1.126 - inches
- Thickness T *** 0.040 - 0.044 - inches
- Lug Height H 0.150 - 0.160 - inches
- Maximum Section S Max 0.099 - 0.109 - inches
- Minimum Section S Min 0.047 - 0.057 - inches
- Hole Diameter R 0.060 - 0.072 - inches
- Thickness Beveled End U 0.032 - 0.034 - inches
- Weight Per 1000 Pcs. 2.700 lbs.
- Edge Margin Y Min. 0.057 inches
- Clearance Dia. Compressed In Housing L1 0.665 inches
- Clearance Dia. Released In Groove L2 0.700 inches
- Gap Width Ring In Groove G 0.145 inches
- Hardness ST 66.000 - 71.000 - HR30N
- Hardness SS 63.000 - 69.500 - HR30N
- Hardness BC 54.000 - 62.000 - HR30N
- Interchange Waldes Truarc N5002 100
- Interchange IRR 3001
- Interchange Anderton N1302 0100
- Interchange Mil Or Aero MS16631F 100
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 6,039 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 6,039 lbs.
- Rigid End Play Take-Up 0.005 inches
Tool Data
- Standard Pliers (Straight) RPL-100
- 45 Standard Pliers RPL-104
- 90 Standard Pliers RPL-109
- Convertible Pliers RP-320
- 45 Convertible Pliers RP-324
- 90 Convertible Pliers RP-329
- Heavy Duty Pliers (Straight) RPN-J1
- 90 Heavy Duty Pliers RPN-J11
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, Internal Beveled. These rings look exactly like their HO counterpart, only they have a 15° angle on the outer edge. This combines with a complementary groove angle to eliminate endplay by wedging itself between the groove and the retained part.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.