Part Data
- Housing or Shaft Shaft
- Axial or Radial Axial
- Shaft Diameter Ds 0.938 inches
- Ds mm 23.800 mm
- Groove Diameter Dg 0.879 - 0.885 - inches
- Groove Width W 0.046 - 0.049 - inches
- Groove Depth D 0.028 inches
- Free Diameter Df 0.857 - 0.872 - inches
- Thickness T *** 0.040 - 0.044 - inches
- Lug Height H 0.131 - 0.141 - inches
- Maximum Section S Max 0.131 - 0.141 - inches
- Minimum Section S Min 0.063 - 0.073 - inches
- Hole Diameter R 0.048 - 0.060 - inches
- Weight Per 1000 Pcs. 4.500 lbs.
- Edge Margin Y Min. inches
- Clearance Dia. Expanded Over Shaft L1 1.230 inches
- Clearance Dia. Released In Groove L2 1.180 inches
- Gaging Dia. Gd Max inches
- Hardness ST 47.000 - 53.000 - HRC
- Hardness SS 44.000 - 51.000 - HRC
- Hardness BC 37.000 - 43.000 - HRC
- Interchange Waldes Truarc 5108 93
- Interchange IRR 4100 93
- Interchange Anderton N1408 0093
- Interchange Mil Or Aero MS16626C 93
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 3,147 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 900 lbs.
- R.P.M. Limits Standard Material RPM 21,500.000
Tool Data
- Standard Pliers (Straight) RPL-200
- 45 Standard Pliers RPL-204
- 90 Standard Pliers RPL-209
- Convertible Pliers RP-320
- 45 Convertible Pliers RP-324
- 90 Convertible Pliers RP-329
- Heavy Duty Pliers (Straight) RPN-A1
- 90 Heavy Duty Pliers RPN-A11
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, External Inverted Functions like an SH ring on a shaft, only the lugs are reversed. This version reduces the distance the lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance is minimal.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.