Rings / Self-Locking and Push-On Retaining Rings / RG

Images

Product Image

CAD

Part Data

  • Housing or Shaft Shaft
  • Axial or Radial Radial
  • Shaft Diameter Ds 0.185 - 0.189 - inches
  • Ds mm 4.800 mm
  • Free Diameter Df 0.175 - 0.181 - inches
  • Thickness T *** 0.033 - 0.037 - inches
  • Large Sect. S 0.085 inches
  • Notch Dia. R 0.048 inches
  • Weight Per 1000 Pcs. 0.450 lbs.
  • Clearance Dia. Installed On Shaft L2 0.440 inches
  • Hardness ST 47.000 - 52.000 - HRC
  • Interchange Waldes Truarc 5135 18
  • Interchange IRR
  • Interchange Anderton
  • Interchange Mil Or Aero
  • Interchange Din

Performance Data

  • Allowable Thrust Load Pr 18.000 lbs.
  • R.P.M. Limits Standard Material RPM

Materials

  • Carbon Steel (SAE 1060-1090)
  • Beryllium Copper
  • Special Material Grades
  • Stainless Steel (PH15-7 Mo, PH17-7)

Finishes

***For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel

Description

External, Self-Locking Radial Grip. The RG makes indentations on either side of the groove once installed which significantly increases its holding power. It can also be installed directly against the face of the retained part, virtually eliminating end play. (Note: this product works only on soft shafts.)

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team

Notes

CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.

 

More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.