Rings / Radially Assembled Retaining Rings / MC

Images

Product Image

CAD

Part Data

  • Housing or Shaft Shaft
  • Axial or Radial Radial
  • Shaft Diameter Ds 1.378 inches
  • Ds mm 35.000 mm
  • Groove Diameter Dg 31.250 - 31.500 - mm
  • Groove Width W 1.750 - 1.950 - mm
  • Groove Depth D 1.750 mm
  • Free Diameter Df 30.550 - 31.050 - mm
  • Thickness T *** 1.520 - 1.680 - mm
  • Maximum Section S Max 4.300 mm
  • Outside Diameter G 39.400 mm
  • Clearance Dia. Installed In Groove L2 40.600 mm
  • Weight Per 1000 Pcs. 3.500 kg
  • Edge Margin Y Min. mm
  • Hardness ST 47.000 - 51.000 - HRC
  • Hardness SS 44.000 - 51.000 - HRC
  • Interchange Waldes Truarc 11-410 0350
  • Interchange IRR
  • Interchange Anderton
  • Interchange Mil Or Aero
  • Interchange Din

Performance Data

  • Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 22.400 kN
  • Thrust Load Groove Safety Factor Of 2 Pg 14.700 kN
  • R.P.M. Limits Standard Material RPM 11,000.000

Materials

  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades

Finishes

***For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel

Documentation

Description

Radially Assembled, External Crescent, ANSI Metric. Ideal for low clearance applications where radial installation is preferred.

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team

Notes

CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.

 

More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.