Rings / Radially Assembled Retaining Rings / JE


Product Image


Part Data

  • Housing or Shaft Shaft
  • Axial or Radial Radial
  • Ds mm 10.00 - 14.00 mm
  • Groove Diameter Dg 9.000 - 9.090 mm
  • Groove Width W 0.90 - 1.00 mm
  • Free Diameter Df 8.850 - 9.000 mm
  • Thickness T *** 0.76 - 0.84 mm
  • Gap A 7.450 - 7.800 mm
  • Beam Width E 2.0 mm
  • Outside Diameter G 17.80 - 18.20 mm
  • Edge Margin Y Min. 2.00 mm
  • Hardness ST 63.0 - 71.0 HR30N
  • Hardness SS 63.0 - 69.5 HR30N
  • Hardness BC 56.5 - 62.0 HR30N
  • Interchange Waldes Truarc
  • Interchange IRR
  • Interchange Anderton
  • Interchange Mil Or Aero
  • Interchange Din


  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades


For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel


Radially Assembled, External E, JIS. Perhaps the most popular and widely used radial retaining ring is the E (so named because it is shaped like the letter E). Three prongs make contact with the bottom of the groove and provide a shoulder for effective re

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team


CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.


More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.