Rings / Self-Locking and Push-On Retaining Rings / DTX

Images

Product Image

CAD

Part Data

  • Housing or Shaft Shaft
  • Axial or Radial Axial
  • Ds mm 1.940 - 2.000 - mm
  • Groove Diameter Dg 1.840 - 1.900 - mm
  • Groove Width W 0.400 mm
  • Thickness T *** 0.250 mm
  • No. Of Prongs 3.000
  • Outside Diameter O.D. 6.500 mm
  • Inside Diameter I.D. 1.850 mm
  • Weight Per 1000 Pcs. kg
  • Edge Margin Y Min. mm
  • Min. Distance Face Of Part To End Of Housing D1 1.500 mm
  • Hardness ST 83.000 - 85.500 - HR15N
  • Hardness SS 82.500 - 86.000 - HR15N
  • Hardness SG 84.000 - 87.500 - HR15N
  • Interchange Waldes Truarc
  • Interchange IRR
  • Interchange Anderton M1465 0200
  • Interchange Mil Or Aero
  • Interchange Din
  • Interchange Seeger-Orbis ZA 2

Performance Data

  • Thrust Load 150 N

Materials

  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades
  • Stainless Steel DIN 1.4122
  • Phosphor Bronze

Finishes

***For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel

Documentation

Description

Self-Locking, External Push-On, Metric. This ring features a curved outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side.

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team

Notes

CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.

 

More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.