Part Data
- Housing or Shaft Shaft
- Axial or Radial Radial
- Ds mm 11.000 - 15.000 - mm
- Groove Diameter Dg 9.910 - 10.000 - mm
- Nom Size Dg 10.000 mm
- Groove Width W 1.250 - 1.330 - mm
- Thickness T *** 1.170 - 1.200 - mm
- Gap A 8.300 - 8.400 - mm
- Outside Diameter G 19.700 mm
- Clearance Dia. Installed In Groove L2 20.400 mm
- Weight Per 1000 Pcs. 1,250.000 kg
- Edge Margin Y Min. 2.000 mm
- Allowable Radius / Chamfer R/Ch Max, 1.800 mm
- Hardness ST 46.000 - 54.000 - HRC
- Hardness SS 44.000 - 51.000 - HRC
- Hardness SG 47.000 - 54.000 - HR30N
- Hardness BC 37.000 - 43.000 - HRC
- Interchange Waldes Truarc
- Interchange IRR
- Interchange Anderton D1500 0100
- Interchange Mil Or Aero
- Interchange Din DIN 6799 10x1.20
- Interchange Seeger-Orbis RA 10
Performance Data
- Thrust Load Ring Pr 3.500 kN
- Pg With Shaft Size Ds 12.000 mm
- Thrust Load Groove Pg 1.700 kN
- R.P.M. Limits Standard Material RPM 15,000.000
- Max. Load W/ R Max Or Ch Max PR 1.750 kN
Tool Data
- Standard Applicator (Flat) A-610
- 45 Applicator A-6104
- 90 Applicator A-6109
- Offset Applicator A-6107
- Rod-Stacked Applicator A-610N
- 45 Rod-Stacked Applicator A-610N4
- 90 Rod-Stacked Applicator A-610N9
- Offset Rod-Stacked Applicator A-610N7
- Heavy Duty Dispenser D-610
- Spring Rail Dispenser SD-610
- Rod-Stacked Dispenser RD-610
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
- Stainless Steel DIN 1.4122
- Phosphor Bronze
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Radially Assembled, External E, Metric. Perhaps the most popular and widely used radial retaining ring is the E (so named because it is shaped like the letter E). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.