Rings / Radially Assembled Retaining Rings / C

Images

Product Image

CAD

Part Data

  • Housing or Shaft Shaft
  • Axial or Radial Radial
  • Shaft Diameter Ds 2.000 inches
  • Ds mm 50.800 mm
  • Groove Diameter Dg 1.795 - 1.805 - inches
  • Groove Width W 0.068 - 0.072 - inches
  • Groove Depth D 0.100 inches
  • Free Diameter Df 1.767 - 1.787 - inches
  • Thickness T *** 0.059 - 0.065 - inches
  • Maximum Section S Max 0.233 - 0.247 - inches
  • Outside Diameter G 2.257 inches
  • Clearance Dia. Installed In Groove L2 2.300 inches
  • Weight Per 1000 Pcs. 16.200 lbs.
  • Edge Margin Y Min. 0.200 inches
  • Hardness ST 47.000 - 52.000 - HRC
  • Hardness SS 44.000 - 51.000 - HRC
  • Hardness BC 34.000 - 43.000 - HRC
  • Interchange Waldes Truarc 5103 200
  • Interchange IRR 2000 200
  • Interchange Anderton N1800 0200
  • Interchange Mil Or Aero MS16632C 200
  • Interchange Din

Performance Data

  • Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 7,410 lbs.
  • Thrust Load Groove Safety Factor Of 2 Pg 7,000 lbs.
  • R.P.M. Limits Standard Material RPM 6,000

Materials

  • Carbon Steel (SAE 1060-1090)
  • Stainless Steel (PH15-7 Mo, PH17-7)
  • Beryllium Copper
  • Special Material Grades

Finishes

For plated rings, add .002" (.05 mm) to the listed maximum thickness.

  • PA - Phosphate, Carbon Steel
  • PD - Phosphate and Oil, Carbon Steel
  • PAL - Phosphate with Sealer, Carbon Steel
  • HPD - Heavy Phosphate and Oil, Carbon Steel
  • ZD - Zinc Plating, Carbon Steel
  • ZF - Zinc Bright, Carbon Steel
  • ZDL - Zinc Dichromate with Sealer, Carbon Steel
  • HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
  • Z3X - Trivalent Chromate over Zinc, Carbon Steel
  • ZFF - Zinc Flash, Carbon Steel
  • CF - Copper Flash, Carbon Steel

Description

Radially Assembled, External Crescent. Ideal for low clearance applications where radial installation is preferred.

Custom solutions

Can’t find what you’re looking for in an existing product, need a modified version of one of our standard parts, or simply aren’t sure what part you need?

Submit your custom specifications

Need help? Contact our Engineering team

Notes

CAD Models are provided for informational purposes only and may not represent the final part you receive.  Manufacturer assumes no responsibility for any such inconsistencies , and disclaims any liability to any party for any loss, damage, or disruption which may arise therefrom. Always contact Manufacturer for final measurements when specified in your design.

 

More than Parts. A True Partnership.

Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.