Retaining Rings, Clamps, Spiral Rings, Wave Springs, Snap Rings
Manufacturing Stainless Steel Retaining Rings
Retaining Rings
Spiral Rings Hose Clamps Wave Springs Constant Section Rings Snap Rings Metric Rings Europe Germany Pliers Retaining Ring
Navigation Box
Navigation
Online Services
Quick Links
Retaining Rings
Rotating Retaining Ring Images

Rotor Clip LTD © 2018
Innovation Every Day

Search results:

SH SH-100
Designation: SH, Type: External (basic shafts & pins), Size Range: .125-10.0 inches (3.2-254.0 mm), Description: External SHaft ring. Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

DCL DCL-26


These single-turn rings are ideal for light duty applications, or where axial positioning is the primary function.

[Show Series]  [Request Quote]   [Request Samples]

MCA MCA-26


Dimensions conform to Metric Aerospace Specification MA 4017.

[Show Series]  [Request Quote]   [Request Samples]

MCA MCA-27


Dimensions conform to Metric Aerospace Specification MA 4017.

[Show Series]  [Request Quote]   [Request Samples]

MCG MCG-26


The rigors of the toughest applications are easily handled by this external series. Its large size, and ease of application and removal, transfers into an assurance of quality for demanding uses.

[Show Series]  [Request Quote]   [Request Samples]

CLM CLM-26


These single-turn rings are ideal for light duty applications, or where axial positioning is the primary function.

[Show Series]  [Request Quote]   [Request Samples]

SH SH-102
Designation: SH, Type: External (basic shafts & pins), Size Range: .125-10.0 inches (3.2-254.0 mm), Description: External SHaft ring. Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

SH SH-106
Designation: SH, Type: External (basic shafts & pins), Size Range: .125-10.0 inches (3.2-254.0 mm), Description: External SHaft ring. Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

MCR MCR-27


With load bearing capacities closer to the heavy-duty series, and almost universal groove dimensions, these rings offer greatest ease of assembly with greatest thrust load capacity.

[Show Series]  [Request Quote]   [Request Samples]

MCG MCG-27


The rigors of the toughest applications are easily handled by this external series. Its large size, and ease of application and removal, transfers into an assurance of quality for demanding uses.

[Show Series]  [Request Quote]   [Request Samples]

MCM MCM-26


These rings offer the greatest economy in price and size. They are able to handle approximately twice the thrust load capacity of the DCL series.

[Show Series]  [Request Quote]   [Request Samples]

MCM MCM-27


These rings offer the greatest economy in price and size. They are able to handle approximately twice the thrust load capacity of the DCL series.

[Show Series]  [Request Quote]   [Request Samples]

MCR MCR-26


With load bearing capacities closer to the heavy-duty series, and almost universal groove dimensions, these rings offer greatest ease of assembly with greatest thrust load capacity.

[Show Series]  [Request Quote]   [Request Samples]

DCL DCL-27


These single-turn rings are ideal for light duty applications, or where axial positioning is the primary function.

[Show Series]  [Request Quote]   [Request Samples]

DSH DSH-27
Designation: DSH - DIN 471, Type: External (basic shafts & pins) - DIN Metric, Size Range: 3mm to 400mm, Description: External SHaft ring manufactured to DIN standard. Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

DSH DSH-26
Designation: DSH - DIN 471, Type: External (basic shafts & pins) - DIN Metric, Size Range: 3mm to 400mm, Description: External SHaft ring manufactured to DIN standard. Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

MSH MSH-27
Designation: MSH, Type: External (basic shafts & pins) - ANSI Metric, Size Range: 4mm to 50mm, Description: External SHaft ring manufactured to ANSI Metric standard. Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

MSH MSH-26
Designation: MSH, Type: External (basic shafts & pins) - ANSI Metric, Size Range: 4mm to 50mm, Description: External SHaft ring manufactured to ANSI Metric standard. Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

SE SE-98
Designation: E - SE - YE - ZE, Type: External (shafts & pins), Size Range: .040-1.375 inches (3.2-34.9 mm), Description: External E ring. Perhaps the most popular and widely used radial retaining ring is the "E" (so named because it is shaped like the letter "E"). The three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.



[Show Series]  [Request Quote]   [Request Samples]

CLR CLR-106


These single-turn snap rings are ideal for applications involving high thrust loads.

[Show Series]  [Request Quote]   [Request Samples]

NCG NCG-100


The waves in this spiral ring compensate for accumulated tolerances.

[Show Series]  [Request Quote]   [Request Samples]

CLR CLR-100


These single-turn snap rings are ideal for applications involving high thrust loads.

[Show Series]  [Request Quote]   [Request Samples]

SHI SHI-106
Designation: SHI, Type: External, Inverted ( shafts & pins), Size Range: .500-3.98 inches (12.7-100 mm), Description: External SHaft Inverted ring. Functions like an SH ring on a shaft, only the lugs are "reversed." This version reduces the distancethe lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance is minimal.



[Show Series]  [Request Quote]   [Request Samples]

SHI SHI-100
Designation: SHI, Type: External, Inverted ( shafts & pins), Size Range: .500-3.98 inches (12.7-100 mm), Description: External SHaft Inverted ring. Functions like an SH ring on a shaft, only the lugs are "reversed." This version reduces the distancethe lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance is minimal.



[Show Series]  [Request Quote]   [Request Samples]

DSI DSI-26
Designation: DSI - to DIN 471, Type: External, Inverted ( shafts & pins) - DIN Metric, Size Range: 12mm to 100mm, Description: External SHaft Inverted ring manufactured to DIN Standard. Functions like an SH ring on a shaft, only the lugs are "reversed." This version reduces the distancethe lugs of the standard DSH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance is minimal.



[Show Series]  [Request Quote]   [Request Samples]

SHR SHR-106
Designation: SHR, Type: External, Heavy Duty ( shafts & pins), Size Range: .394-2.0 inches (10.0-50.8 mm), Description: External SHaft Reinforced ring. The SHR is an extra thick version of a regular SH retaining ring. As such, it is stronger and can with stand greater thrust loads than its standard counterpart.



[Show Series]  [Request Quote]   [Request Samples]

SHR SHR-98
Designation: SHR, Type: External, Heavy Duty ( shafts & pins), Size Range: .394-2.0 inches (10.0-50.8 mm), Description: External SHaft Reinforced ring. The SHR is an extra thick version of a regular SH retaining ring. As such, it is stronger and can with stand greater thrust loads than its standard counterpart.



[Show Series]  [Request Quote]   [Request Samples]

DSR DSR-27
Designation: DSR - to DIN 471, Type: External, Heavy Duty ( shafts & pins) - DIN Metric, Size Range: 12mm to 100mm, Description: External SHaft Reinforced ring manufactured to DIN standards. The DSR is an extra thick version of a regular DSH retaining ring. As such, it is stronger and can withstand greater thrust loads than its standard counterpart.



[Show Series]  [Request Quote]   [Request Samples]

DSR DSR-26
Designation: DSR - to DIN 471, Type: External, Heavy Duty ( shafts & pins) - DIN Metric, Size Range: 12mm to 100mm, Description: External SHaft Reinforced ring manufactured to DIN standards. The DSR is an extra thick version of a regular DSH retaining ring. As such, it is stronger and can withstand greater thrust loads than its standard counterpart.



[Show Series]  [Request Quote]   [Request Samples]

MSR MSR-27
Designation: DSR, Type: External, Heavy Duty ( shafts & pins) - ANSI Metric, Size Range: 10mm to 50mm, Description: External SHaft Reinforced ring manufactured to ANSI Metric standards. The MSR is an extra thick version of a regular MSH retaining ring. As such, it is stronger and can withstand greater thrust loads than its standard counterpart.



[Show Series]  [Request Quote]   [Request Samples]

BSH BSH-100
Designation: BSH, Type: External, Bowed (shafts & pins), Size Range: .250-1.750 inches (4.8-44.4 mm), Description: External Bowed SHaft ring. Compensating for accumulated tolerances is what a BSH "Bowed" retaining ring is designed to do on a shaft. Once snapped into the groove, bowed rings exert a force or a "preload" on the retained parts for the range specified in the catalog.



[Show Series]  [Request Quote]   [Request Samples]

BSH BSH-102
Designation: BSH, Type: External, Bowed (shafts & pins), Size Range: .250-1.750 inches (4.8-44.4 mm), Description: External Bowed SHaft ring. Compensating for accumulated tolerances is what a BSH "Bowed" retaining ring is designed to do on a shaft. Once snapped into the groove, bowed rings exert a force or a "preload" on the retained parts for the range specified in the catalog.



[Show Series]  [Request Quote]   [Request Samples]

BSH BSH-106
Designation: BSH, Type: External, Bowed (shafts & pins), Size Range: .250-1.750 inches (4.8-44.4 mm), Description: External Bowed SHaft ring. Compensating for accumulated tolerances is what a BSH "Bowed" retaining ring is designed to do on a shaft. Once snapped into the groove, bowed rings exert a force or a "preload" on the retained parts for the range specified in the catalog.



[Show Series]  [Request Quote]   [Request Samples]

VSH VSH-106
Designation: VSH, Type: External, Beveled (shafts & pins), Size Range: 1.0-10.0 inches (25.4-254.0 mm), Description: External Beveled (V) SHaft ring. These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.



[Show Series]  [Request Quote]   [Request Samples]

VSH VSH-100
Designation: VSH, Type: External, Beveled (shafts & pins), Size Range: 1.0-10.0 inches (25.4-254.0 mm), Description: External Beveled (V) SHaft ring. These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.



[Show Series]  [Request Quote]   [Request Samples]

VSH VSH-102
Designation: VSH, Type: External, Beveled (shafts & pins), Size Range: 1.0-10.0 inches (25.4-254.0 mm), Description: External Beveled (V) SHaft ring. These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.



[Show Series]  [Request Quote]   [Request Samples]

DST DST-26
Designation: DST - DIN 983, Type: External, toothed ( shafts & pins) - DIN Metric, Size Range: 16mm to 140mm, Description: Similar in design to the DSH external ring, it features several "teeth" equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.



[Show Series]  [Request Quote]   [Request Samples]

C C-100
Designation: C, Type: External (shafts & pins), Size Range: .125-2.0 inches (3.2-50.8mm), Description: External Crescent ring. Ideal for low clearance applications where radial installation is preferred.



[Show Series]  [Request Quote]   [Request Samples]

DC DC-26
Designation: DC, Type: External (shafts & pins) - ANSI Metric, Size Range: 3mm to 55mm, Description: External Crescent ring. Ideal for low clearance applications where radial installation is preferred.



[Show Series]  [Request Quote]   [Request Samples]

MC MC-26
Designation: MC, Type: External (shafts & pins) - ANSI Metric, Size Range: 3mm to 55mm, Description: External Crescent ring. Ideal for low clearance applications where radial installation is preferred.



[Show Series]  [Request Quote]   [Request Samples]

MC MC-28
Designation: MC, Type: External (shafts & pins) - ANSI Metric, Size Range: 3mm to 55mm, Description: External Crescent ring. Ideal for low clearance applications where radial installation is preferred.



[Show Series]  [Request Quote]   [Request Samples]

LC LC-98
Designation: LC, Type: External, Interlocking (shafts & pins), Size Range: .469-3.375 inches (11.9-85.7 mm), Description: External InterLocking C ring. The LC ring is produced in two identical halves. The ends interlock into a groove on a shaft and, once assembled, are dynamically balanced. As a result, they are particularly effective at retaining assemblies with extremely high rotational speeds.



[Show Series]  [Request Quote]   [Request Samples]

PO PO-100
Designation: PO, POL, Type: External (shafts & pins), Size Range: PO-.156-2.000 inches (4.0mm-50.8mm), POL-.156-1.000 inches (4.0mm-25.4mm), Description: External POodle Ring/ External POodle Light Ring. The PO ring features wide "ears" (resembling those of a poodle, thus the name) which offer extra retention surface against the retained part. PO rings also come in thinner sizes as a standard series of rings known as POL.



[Show Series]  [Request Quote]   [Request Samples]

POL POL-100
Designation: PO, POL, Type: External (shafts & pins), Size Range: PO-.156-2.000 inches (4.0mm-50.8mm), POL-.156-1.000 inches (4.0mm-25.4mm), Description: External POodle Ring/ External POodle Light Ring. The PO ring features wide "ears" (resembling those of a poodle, thus the name) which offer extra retention surface against the retained part. PO rings also come in thinner sizes as a standard series of rings known as POL.



[Show Series]  [Request Quote]   [Request Samples]

TX TX-100
Designation: TX, TY, Type: External, Reinforced (shafts & pins), Size Range: .094-1.000 inches (2.3-25.4mm), Description: Toothed eXternal "Push on" ring/ Toothed External (next in series after X) "Push on" ring. This ring features an outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side. The difference between these two rings is that the outer rim of the TX is curved while the rim of the TY is flat. The curved rim of the TX affords greater thrust load capacity than the TY and is easier to orient for assembly.



[Show Series]  [Request Quote]   [Request Samples]

TY TY-100
Designation: TX, TY, Type: External, Reinforced (shafts & pins), Size Range: .094-1.000 inches (2.3-25.4mm), Description: Toothed eXternal "Push on" ring/ Toothed External (next in series after X) "Push on" ring. This ring features an outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side. The difference between these two rings is that the outer rim of the TX is curved while the rim of the TY is flat. The curved rim of the TX affords greater thrust load capacity than the TY and is easier to orient for assembly.



[Show Series]  [Request Quote]   [Request Samples]

USC USC-100


External Inch Constant Section Ring. Designed for needle bearings, once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

[Show Series]  [Request Quote]   [Request Samples]

USC USC-102


External Inch Constant Section Ring. Designed for needle bearings, once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

[Show Series]  [Request Quote]   [Request Samples]

USC USC-106


External Inch Constant Section Ring. Designed for needle bearings, once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

[Show Series]  [Request Quote]   [Request Samples]

SNL SNL-100
External Inch Constant Section Ring. A light duty ring designed for needle bearings that once installed in the groove of a shaft, the portion of th ering protruding from the groove holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

SHC SHC-100
External Inch Constant Section Ring - Square Section - Heavy - Closed. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

SHC SHC-100
External Inch Constant Section Ring - Square Section - Heavy - Closed. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

SHC SHC-106
External Inch Constant Section Ring - Square Section - Heavy - Closed. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

SLC SLC-100
External Inch Constant Section Ring - Square Section - Light - Closed. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

SLC SLC-100
External Inch Constant Section Ring - Square Section - Light - Closed. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

SLC SLC-106
External Inch Constant Section Ring - Square Section - Light - Closed. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

SHO SHO-106
External Inch Constant Section Ring - Square Section - Heavy - Open. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

SLO SLO-106
External Inch Constant Section Ring - Square Section - Light - Open. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

RHC RHC-106
External Inch Constant Section Ring - Round Section - Heavy - Closed. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

RHC RHC-100
External Inch Constant Section Ring - Round Section - Heavy - Closed. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

RLC RLC-106
External Inch Constant Section Ring - Round Section - Light - Closed. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

RLC RLC-100
External Inch Constant Section Ring - Round Section - Light - Closed. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

RHO RHO-106
External Inch Constant Section Ring - Round Section - Heavy - Open. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

RHO RHO-100
External Inch Constant Section Ring - Round Section - Heavy - Open. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

RLO RLO-106
External Inch Constant Section Ring - Round Section - Light - Open. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

RLO RLO-100
External Inch Constant Section Ring - Round Section - Light - Open. Once installed in the groove of a shaft, the portion of the ring protruding from the groove, holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

CFS CFS-27
External Metric Constant Section Ring - Flat Wire. Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

CFS CFS-26
External Metric Constant Section Ring - Flat Wire. Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

CRS CRS-26
DIN 7993 - External Metric Constant Section Ring - Round Wire. Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.



[Show Series]  [Request Quote]   [Request Samples]

CL CL-106


External Light duty. .500"-10.000". These rings provide the same performance as the KL series, but are fitted externally.

[Show Series]  [Request Quote]   [Request Samples]

CL CL-100


External Light duty. .500"-10.000". These rings provide the same performance as the KL series, but are fitted externally.

[Show Series]  [Request Quote]   [Request Samples]

CM CM-103
External Medium duty. .500"-11.000" As with its internal counterpart, this series offers superb quality for medium applications.



[Show Series]  [Request Quote]   [Request Samples]

CM CM-100
External Medium duty. .500"-11.000" As with its internal counterpart, this series offers superb quality for medium applications.



[Show Series]  [Request Quote]   [Request Samples]

CM CM-102
External Medium duty. .500"-11.000" As with its internal counterpart, this series offers superb quality for medium applications.



[Show Series]  [Request Quote]   [Request Samples]

CM CM-109
External Medium duty. .500"-11.000" As with its internal counterpart, this series offers superb quality for medium applications.



[Show Series]  [Request Quote]   [Request Samples]

CM CM-106
External Medium duty. .500"-11.000" As with its internal counterpart, this series offers superb quality for medium applications.



[Show Series]  [Request Quote]   [Request Samples]

CR CR-106
External Medium-heavy duty. .469"-10.000" Externally fitted to up to 10in. Shaft diameter, these rings can handle all but the most rigorous applications.



[Show Series]  [Request Quote]   [Request Samples]

CR CR-100
External Medium-heavy duty. .469"-10.000" Externally fitted to up to 10in. Shaft diameter, these rings can handle all but the most rigorous applications.



[Show Series]  [Request Quote]   [Request Samples]

CR CR-102
External Medium-heavy duty. .469"-10.000" Externally fitted to up to 10in. Shaft diameter, these rings can handle all but the most rigorous applications.



[Show Series]  [Request Quote]   [Request Samples]

CG CG-106
External Heavy duty. .469"-15.000" The rigors of the toughest applications are easily handled by this external series. Its large size, and ease of application and removal, transfers into an assurance of quality for demanding uses.



[Show Series]  [Request Quote]   [Request Samples]

CG CG-102
External Heavy duty. .469"-15.000" The rigors of the toughest applications are easily handled by this external series. Its large size, and ease of application and removal, transfers into an assurance of quality for demanding uses.



[Show Series]  [Request Quote]   [Request Samples]

CG CG-100
External Heavy duty. .469"-15.000" The rigors of the toughest applications are easily handled by this external series. Its large size, and ease of application and removal, transfers into an assurance of quality for demanding uses.



[Show Series]  [Request Quote]   [Request Samples]

DCR DCR-26
DIN External Metric series. 13mm-400mm For applications where European DIN standards need to be met, these rings are designed to fit into the grooves established by DIN specefications.



[Show Series]  [Request Quote]   [Request Samples]

DCR DCR-27
DIN External Metric series. 13mm-400mm For applications where European DIN standards need to be met, these rings are designed to fit into the grooves established by DIN specefications.



[Show Series]  [Request Quote]   [Request Samples]

Rotor Clip Company - Right Navigation
International

Germany United States
Rotor Clip Product Search
Product Search

Snap Rings
Help Center
Snap Rings
News

Press Releases

Latest News:

Rotor Clip Implements New Deburring Process

Read All Articles

RSS News Feed
Rotor Clip Footer - Address
Rotor Clip Footer - Phone
Rotor Clip Footer - Fax
Rotor Clip Footer